Temperature sensors
MK2-G1/2 / EK2-G1/2
- Analogue output 4-20 mA
- Continuous temperature measurement
- Nearly any length of cable connection between sensor and control unit
- Sensor length up to 1 m / 3.3 ft
- Brass or stainless steel housing
- Various plug options
TF-M/E-G1/2
- Pt100 temperature sensor
- Continuous temperature measurement
- Sensor length up to 1 m / 3.3 ft
- Brass or stainless steel housing
- Various plug options
TF-M-VAL
- Temperature sensor Pt100 with spring
- Pt100 temperature sensor
- Continuous temperature measurement
- Integrated spring for variable sensor length
- Various plug options
Changes in the viscosity of hydraulic oil and lubricants due to the temperature requires precisely monitoring and stabilising the operating temperature.
Carefully monitoring the temperature further also affects the service life of the oils. The oil tank is generally accepted as the control point for the oil temperature, which will usually provide helpful averages. It may further be helpful to also monitor segments or individual units within a system.
The values determined from the measuring points must be transferred to the system control according to standards. For safety reasons, it is advisable to at a minimum display the current oil temperature on the oil tank.
The comprehensive line of system-compatible temperature sensors is tailored specifically for use in hydraulics and lubrication technology.
- DocumentsTo download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
- Certificates & approvalsTo download, simply select the respective documents and click "My Downloads" above.
Certificates & approvals
- Contact Person
- Marvin DoseInternal Sales & Application Manager (FC)+49 (0)2102 / 4989-20m.dose@ buehler-technologies.com
- Rafael KleinInternal Sales & Application Manager (FC)+49 (0)2102 / 4989-20r.klein@ buehler-technologies.com
- Johnny de WerthInternal Sales & Application Manager (FC)+49 (0)2102 / 4989-20j.dewerth@ buehler-technologies.com
- Markus GesterHead of Internal Sales & Application Management(FC)m.gester@ buehler-technologies.com