Water alarms/Moisture sensors
Physical or electronic devices for reporting or measuring free water or relative moisture in oil. Moisture sensors with local or remote display.
Finding the way to your individual solution, step by step ...
Oil moisture sensor BCM
This sensor can be used to measure the relative moisture in oil, before the saturation point of the oil is reached and free water is formed. It is available as a pure transmitter as well as with a local display. Operating pressure up to 50 bars / 725 psi.
Water alarm unit WW 6
A water alarm unit working on the principle of interface level measurement, for the reliable detection of free water in oil tanks. The device is connected to the tank externally using communicating tubes and triggers a signal, as soon as approx. 90 ml of water have accumulated. The switching contact can be used to trigger an alarm or to directly drain the water.
Water alarm unit WW 3 / WW 10
These water alarm units working on the principle of interface level measurement serve the reliable detection of free water in applications with a high rate of water penetration. The device is connected to the tank externally using communicating tubes and has two switching outputs. These can be used to trigger alarms or to directly drain the water. This device is available with a transparent or closed container.
Nivotemp 61-0 WW
This device combination combines liquid level and temperature monitoring with a reliable interface measurement to detect free water in oil tanks. For this purpose, the bottom of the tank must have a cavity, in which the water can accumulate. In order to perform the various functions, the device has two specifically balanced floats.
Can’t find a suitable product? Click Contact Person to contact one of our experts. Or use the contact form to contact us.