Sample Gas Cooler EGK 2A Ex
- Compressor Cooler
- Nominal capacity 615 kJ/h respectively 583 Btu/hr
- 1 or 2 gas paths
- Stainless steel, glass or PVDF heat exchanger
- Status display
- Up to 45 °C / 113 °F ambient temperature
- Approvals: ATEX, EAC Ex, IECEx
This gas cooler was designed specifically for use in explosive areas. It features a high performance compressor cooling system which ensures an extremely stable gas output dew point, even in ambient temperatures up to +45 °C / 113 °F.
The cooling block can accommodate two high efficiency heat exchangers, available in stainless steel, Duran glass or PVDF, with one or two gas paths. Fully equipped the cooler can therefore supply four separate gas paths. Heat dissipates through a large convector, the electronic controller is moulded and located in a separate housing. A programmable display shows the temperature of the cooling block. A blinking display indicating excess and low temperature and a fail-safe control relay output. These status outputs mark an adjustable range around the output dew point. Automatic condensate drains can be installed inside the device to drain condensate.
- DocumentsTo download, simply select the respective documents and click "My Downloads" above.
Data sheets
Detailed operating instructions
- Spare Parts
4510023 TS heat exchanger, gas connections: G 1/4", condensate out connection: G 3/8", material: Stainless steel 1.4571 4510025I TS-I heat exchanger, gas connections: NPT 1/4"", condensate out connection: NPT 3/8", material: Stainless steel 1.4571 4510013 TG heat exchanger, gas connections: GL14 (6 mm), condensate out connection: GL25 (12 mm), material: Duran glass 4501004 TV-SS heat exchanger, gas connections: DN 4/6, condensate out connection: G 3/8", material: PVDF 4501004I TV-SS-I heat exchanger, gas connections: 1/4"-1/6", condensate out connection: NPT 3/8", material: PVDF 4501026 DTS heat exchanger, gas connections: 6 mm tube, condensate out connection: 10 mm tube, material: Stainless steel 1.4571 4501026I DTS-I heat exchanger, gas connections: 1/4" tube, condensate out connection: 3/8" tube, material: Stainless steel 1.4571/1.4404 4501023 DTS-6 heat exchanger, gas connections: 6 mm tube, condensate out connection: 6 mm tube, material: Stainless steel 1.4571 4501023I DTS-6-I heat exchanger, gas connections: 1/4" tube, condensate out connection: 1/4" tube, material: Stainless steel 1.4571/1.4404 4501027 DTG heat exchanger, gas connections: GL14 (6 mm), condensate out connection: GL18 (10 mm), material: Duran glass 4501040 DTV heat exchanger, gas connections: DN 4/6, condensate outlet: DN 5/8, material: PVDF 4501040I DTV-I heat exchanger, gas connections: 1/4"-1/6", condensate out connection: 3/16"-5/16", material: PVDF 45909996 Plug-in resistance thermometer with connecting cable for EGK2-Ex 45909997 Electronics EGK 2 Ex, 230 V 50/60 Hz, moulded 45919997 Electronics EGK 2 Ex, 115 V 50/60 Hz, moulded 45909992 Capacitor 55 µF +- 5 %, Un 280 V 50/60 Hz 10000 h/Cl. B, SEV 10 ATEX 0154X, II 2G Ex q IIC T6 Gb, dimensions ø60x190, lead length 450 - Contact Person
Datenblatt Kompressor-Messgaskühler EGK 2A Ex, PDF (257 KB) 
Data sheet Sample Gas Cooler EGK 2A Ex, PDF (256 KB) 
Data sheet Sample Gas Cooler EGK 2A Ex, PDF (257 KB) 
Feuille de données Refroidisseur de gaz à compression modèle EGK 2A Ex, PDF (258 KB) 
Hoja de datos Refrigerador de gas de medición/compresor EGK 2A Ex, PDF (258 KB) 
参数表 蠕动泵 EGK 2A Ex, PDF (465 KB) 
Supplement to operating instructions EGK 2 Ex/EGK 2A Ex, PDF (277 KB) 
