Skip navigation
Feuchtefuehler_mood.jpg

Moisture Penetration Monitor

In extractive gas analysis the sample gas must be conditioned before it enters the measuring cell of the analyser. One of these conditioning stages is moisture condensing in so-called sample gas coolers. However, since the composition of the sample gas and the process parameters can fluctuate, condensate slip downstream from the cooler cannot be entirely ruled out. Moisture detectors installed in the cooler output indicate such slip. The detectors are extremely sensitive so fault conditions are detected early. Combined with suitable controllers this will generate the respective signals/alarms in the control system. For this series we offer various moisture detector models and a large range of accessories.

tn_feuchtefuehler.jpg

Moisture Detector

  • Extremely early warning, when condensation starts to form
  • Up to 40 bar / 580 psi pressure range
  • Detector versions with cable break detection
  • Controllers for wall mounting
  • Controllers for rail mounting
  • Controllers for 19” installation
  • Controllers for explosive areas
Dr. Claus-Peter Jellen
Product Manager Gas Conditioning

+49 (0) 2102 / 4989-23

Ulrich König
Gas Conditioning

+49 (0) 2102 / 4989-32

Julian Kleineberg
Junior Product Manager Gas Conditioning

+49 (0) 2102 / 4989-65