Fine Mesh Filter AGF-VA-350
- Very quick and easy filter changes without tools
- Low dead volume
- Variable wall mounting via mounting bracket
- Ability to (auto) drain condensate via threaded connection (NPT 1/4") inside filter cover
Even if the particular contaminant has already been removed at the extraction point inside the through effective particle filtration gas sampling probe, in long or branched sample gas line there is a risk of secondary contamination.
Additional filters are therefore often installed at the point where the sample gas enters the analysis system and also before delicate system components. The filter housings must be made of corrosion-resistant, non-absorbent materials, easy to install and easy to maintain. They should further be compatible with various filter elements. This particle filter with corrosion-resistant stainless steel housing is suitable for high pressure gas applications up to 350 bar/5076 psi.
- DocumentsTo download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
- Spare Parts
4135G002 Fibreglass filter element, filter fineness 2µm, epoxy resin binder, øi=12,7 mm, L=57 mm, max. 150 °C 4135G005 Fibreglass filter element, filter fineness 5µm, epoxy resin binder, øi=12,7 mm, L=57 mm, max. 150 °C 4135G010 Fibreglass Filter element, filter fineness 10µm, epoxy resin binder, øi=12,7 mm, L=57 mm, max. 150 °C - Contact Person
- Kevin KöseogluInternal Sales & Application Manager (AT)k.koeseoglu@ buehler-technologies.com
- Dennis GrübmeyerInternal Sales & Application Manager (AT)d.gruebmeyer@ buehler-technologies.com
- Dr. Claus-Peter JellenHead of Internal Sales & Application Management Components for Sample Gas Conditioning (AT)c.jellen@ buehler-technologies.com