skip_navigation

Gas Cooler Series TC-MIDI+

  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • Duran glass or PVDF heat exchanger
  • Adjustable outlet dew point and alarm thresholds
  • Nominal cooling capacity 195 kJ/h (40 °C version) or 175 kJ/h (50 °C version)
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperature display
  • Optional 4 - 20 mA or Modbus RTU signal output
  • Optional CE mark or FM approval
  • Moisture detector, filter, condensate pump and sample gas pump optional

Many analysis processes require extracting sample gas from the process. This also extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The sample gas cooler reduces the gas temperature to below the dew point for this purpose, causing moisture to drop out, which is then discharged as condensate.

In addition to the status output to monitor the sample gas cooler function, we offer an optional 4 – 20 mA analog output or digital interface. The process control can access the process and diagnostic data via the Modbus RTU interface as well as configure the device settings.

The TC-MIDI+ sample gas cooler is particularly a component in gas conditioning when the process or ambient conditions require a higher cooling capacity. It further features a new generation heat exchangers with particularly low washout of water-soluble components and particularly suitable for measuring emissions. Most notably, the washout of SO2 is low. The TC-MIDI+ sample gas coolers can therefore be used for so- called automated measuring systems (AMS) as per EN 15267-3.

To download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
Operating instructions (General Purpose FM certified)
Dr. Claus-Peter Jellen
Head of Internal Sales & Application Management Components for Sample Gas Conditioning (AT)


Ulrich König
Inside-Sales-Support (AT)


Natalia Justus
Internal Sales & Application Manager (AT)