Bühler Technologies GmbH

Sample gas probe GAS 222.11 Ex1

Sample Gas Probe GAS 222.11 Ex1

  • Versions with Atex and IECEx approval
  • Unheated probe with shut-off valve and/or upstream filter
  • The filter element can easily be removed by turning the handle 90°
  • For dust loads up to 2 g/m3, non-condensable gases. Combined with upstream filter up to 10 g/m3 and higher
  • This probe is designed for use in explosive areas.
  • Use in zone 1 and 21 and sampling from zone 0 and 20.

In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results.

The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas.

However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.