Sample Gas Probe GAS 222.30 Ex2
- Versions with Atex and IECEx approval
- Unheated probe with Shut-off valve and inlet filter
- For dust loads up to 200 g/m³, non-condensable gases
- The probe is suitable for use in explosive areas
In many applications gas analysis is key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results.
The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas.
However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
- DocumentsTo download, simply select the respective documents and click "My Downloads" above.
Data sheets
Detailed operating instructions
- Rückspülsteuerung RSS 24 / RSS 230To download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
- Rückspülsteuerung RSS 24 / RSS 230
- Spare Parts
- General Spare Parts
90 091 05 Measuring outlet seal 90 090 79 Flange seal DN65 PN6 90 090 42 Flange seal ANSI3” 150 lbs 90 090 68 Flat seal FD 40 WS For filter elements please see the accessories data sheet "Accessories for sample gas probes 222"
- General Spare Parts
- Contact Person
- Kevin KöseogluInternal Sales & Application Manager (AT)k.koeseoglu@ buehler-technologies.com
- Dennis GrübmeyerInternal Sales & Application Manager (AT)d.gruebmeyer@ buehler-technologies.com
- Dr. Claus-Peter JellenHead of Internal Sales & Application Management Components for Sample Gas Conditioning (AT)c.jellen@ buehler-technologies.com