Sample Gas Probe GAS 222.35-U Ex1
- Versions with Atex and IECEx approval
- Unheated probe with upstream filter
- The filter element can easily be removed by turning the handle 90°
- For dust loads up to 200 g/m3, non-condensable gases
- This probe is designed for use in explosive areas.
Use in zone 1 and 21 and sampling from zone 0 and 20.
In many applications gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results.
The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas.
However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
- DocumentsTo download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
- Accessories for sample gas probes GAS 222To download, simply select the respective documents and click "My Downloads" above.
Data sheets
- Blowback control RSS 24 / RSS 230To download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
- Accessories for sample gas probes GAS 222
- Spare Parts
- Contact Person
- Kevin KöseogluInternal Sales & Application Manager (AT)k.koeseoglu@ buehler-technologies.com
- Dennis GrübmeyerInternal Sales & Application Manager (AT)d.gruebmeyer@ buehler-technologies.com
- Dr. Claus-Peter JellenHead of Internal Sales & Application Management Components for Sample Gas Conditioning (AT)c.jellen@ buehler-technologies.com