External Tank Installation Bypass

Particularly in lubrication technology, large volumes of oil are often used. This requires large-capacity oil reservoirs with corresponding dimensions. Due to their size, the top sections of these tanks are usually permanently connected and often not easily accessible or visible. In such cases, level monitoring is implemented by mounting the device on an accessible side wall of the tank.

No. There are numerous applications in mechanical engineering, such as large gearboxes, water turbines, and high-pressure pumps, where internal oil reservoirs can only be monitored using externally mounted level monitoring devices.

No. In most cases, the temperature at the mounting location does not correspond to the actual operating temperature. Therefore, temperature measurement should be taken at a more relevant point within the system.

Yes. The Bühler Technologies Fluidcontrol product range offers devices for pressure ratings of 10, 25, 64, 250, and 360 bar.

Flange distances of up to 5000 mm can be realized.