- 1 switching contact
- Reliable, physical process
- Visual and electrical monitoring
- Small display quantity
- Easy installation with the installation kit
- Operating pressure max. of 6 bars / 87 psi
Reliable display of interface level of oil and free water. Small reaction volume; therefore, also recommended for smaller oil tanks.
A water alarm unit working on the principle of interface level measurement, for the reliable detection of free water in oil tanks. The device is connected to the tank externally using communicating tubes and triggers a signal, as soon as approx. 90 ml of water have accumulated. The switching contact can be used to trigger an alarm or to directly drain the water.
Datenblatt Wasserwarner WW 6, PDF (329 KB) 
Data sheet Water alarm unit WW 6, PDF (329 KB) 
Data sheet Water alarm unit WW 6, PDF (329 KB) 
Feuille de données Détecteurs d'eau WW 6, PDF (329 KB) 
Hoja de datos Detector de agua WW 6, PDF (329 KB) 
参数表 水位报警器 WW 6, PDF (385 KB) 
Техническое описание Сигнальное реле для обнаружения воды WW 6, PDF (339 KB) 
Brief Instructions WW3, WW6, WW10 (BX300001), PDF (693 KB) 
EU declaration of conformity / EU-Konformitätserklärung WW6 KX300001, PDF (51 KB) 
![[Translate to English:] Feuchte-Sensor mit IO-Link und Sensor zur Temperatur-Erfassung](/fileadmin/images/fluidcontrol/products/water_alarm_units/tn_bcm.jpg "[Translate to English:] Ölfeuchtesensor BCM")
![[Translate to English:] Gerätekombination zur Feuchte-, Temperatur- und Füllstand-Messung mit zuverlässiger Trennschichtmessung](/fileadmin/images/fluidcontrol/products/water_alarm_units/tn_ww_nivotemp61.jpg "[Translate to English:] Nivotemp 61-0 WW")
![[Translate to English:] Füllstand und Temperatur Messung in Hydrauliktanks auch als Frequenzausgang programmierbar](/fileadmin/images/fluidcontrol/products/tank_top/tn_nivotemp_nt_61.jpg "[Translate to English:] Öltemperatur- und Füllstandmesser Nivotemp NT 61/NT 61D")