Bühler Technologies GmbH
English
Downloads ()

Flow Meter SM-6

Flow Meter SM-6

[Translate to English:] Korrosionsfester Strömungsmesser SM-6 mit optionalem Grenzwertschalter
  • Corrosion-resistant materials
  • Easy installation
  • Designed for air and water
  • Special measuring ranges available upon request
  • Easy measuring tube replacement
  • Option to add limit switch and needle valve
  • Cover prevents contact and accidental adjustment of the measuring point
  • Used in DNV type-tested conditioning unit
  • Special design for use in high-vibration environments

The flow of the sample gas to the analyser must be monitored in the extractive gas analysis. The flow meters of the SM-6 series offer efficient flow measurement for gases and liquids. The applications are typically very complex and require the use of particularly corrosion-resistant materials as well as high operating reliability

In addition to visual flow measurements, they are also suitable for monitoring the depletion of the filtration capacity of the filter installed in the conditioning line. Electric limit switches can be mounted to the measuring tube for this purpose. These connect to the control system via suitable switch amplifiers. Types with built-in needle valves also allow a specific flow rate to be set.

A corrosion-resistant polycarbonate cover which can also be easily retrofitted to previously installed devices is available as an accessory. The transparent, well-ventilated cover protects the front and both sides of the flow meter, and offers reliable protection against accidental adjustment of the measuring point, particularly for devices equipped with ring initiators. At the same time, the measuring tube is protected against light impacts.