Bühler Technologies GmbH
English
Downloads ()

Peristaltic Condensate Pumps CPsingle, CPdouble

Peristaltic condensate and metering pumps CPsingle, CPdouble

  • Built-in and housing version
  • FM approval optional
  • Separate installation possible
  • Various flow rates
  • Metering pumps with low flow rates
  • Easy to replace hoses
  • Various hose materials available for demanding applications
  • 115/230 V AC or 24 V DC
  • Used in DNV type-tested conditioning unit
  • Can be used in a system to maintain the IMO MARPOL MEPC.259(68)
  • Special design for use in high-vibration environments

Condensate accumulates most probably while wet sample gas is processed through a conditioning system. On one hand this may occur inadvertently if thermal bridges occur in the sample gas lines. On the other hand the deposit of moisture is necessary to protect the measuring cells in the analyser from damage and/or stabilise measurements.

Since the sample gas is often conveyed through the analysis system with suction, the condensate must be pumped off to remove it.

So-called peristaltic pumps are particularly suited for this purpose. They systemically protect the sample gas system from external air and based on the hose material used offer high resistance against the often times highly corrosive condensate.

The CPsingle and CPdouble pump series were developed specifically for these severe operating conditions.