skip_navigation

Sample gas probe GAS 222.15 MA

  • Heated probe with downstream filter
  • The downstream filter can easily be removed by turning the handle 90°.
  • Increased degree of protection (IP66) due to the specially developed silicone protective cover
  • Particularly suitable for use in high-vibration applications (such as marine) due to special design features
  • The probe body and the area around the screw connection for the heated sample gas line are completely insulated
  • Self-regulating heater to approx. 180 °C with low temperature alarm.
  • For dust loads up to 2 g/m³

In many applications gas analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results. The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas. However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. The design of the GAS 222.15-MA is particularly suited for marine applications.

462221521 2-piece insulation for
- Probes GAS 222.15/17/20
- Filter AHF-22-
462221524Insulating ring for cap on the 2-piece insulation for
- Probes GAS 222.15/17
- Filter AHF-22-S
9009105 Seal for sample gas outlet for - GAS 222 series probes - AHF-22 filter -*** OD=50.5 x ID=6x3mm, material: Silicone up to +200°C
9009079Flange seal DN65 PN6 for
- Probes GAS 222 OD=77 x ID=115x2mm, material: Pure graphite
9136050052Thermostat 155°C NC contact min. IP40 trigger point 155°C +/-5K reset point 140°C +/-5K max. ambient temperature 200°C
9136050056Thermostat 155°C NO contact min. IP40 trigger point 155°C +/-5K reset point 140°C +/-5K max. ambient temperature 200°C
462221523Caps for self-regulating
- Probes GAS 222.14/15/17(Atex2/Amex)
- Filter AHF-22
for 2-piece insulation
462221534Spare parts kit GAS 222.15/17
Cap, complete, incl.
- Insulating ring, spacers
- Heating cartridges with thermostat
- Cable box 3-pin +PE, PG11
462221513Cover piece with handle for GAS 222.1x/2x, material: 1.4571 / Polyamide
46222012O-ring kit for filter element and probe incl. O-ring lubricant, material: Viton
46222024 O-ring kit for filter element and probe, material: Perfluoroelastomer
46222026Ceramic filter element incl. Viton O-rings, filter fineness 3 μm
46222026PCeramic filter element incl. perfluoroelastomer O-rings, filter fineness 3 μm
46222010Sintered stainless steel filter element incl. Viton O-rings, filter fineness 5μm
46222010PSintered stainless steel filter element incl. perfluoroelastomer O-rings, filter fineness 5μm
46222011Sintered stainless steel filter element incl. Viton O-rings, filter fineness 5μm
46222011PPleated stainless steel mesh filter element incl. perfluoroelastomer O-rings, filter fineness 10μm
46222067Cover piece for GAS 222.1*/2* with end sleeves to hold the micro-fibreglass filter element, material: 1.4571/Polyamide
462220671Micro-fibreglass with silicate binder filter element incl. Viton O-rings, filter fineness 0.1μm
462220671PMicro-fibreglass with silicate binder filter element incl. perfluoroelastomer O-rings, filter fineness 0,1μm
46222163Cover piece for GAS 222.1x/2x, complete with receiving tube, incl. filter floss and Viton O-rings
46222163PCover piece for GAS 222.1x/2x, complete with receiving tube, incl. filter floss and perfluoroelastomer O-rings
46222167Filter floss for GAS 222.1x/2x, content 100 g
Kein Ansprechpartner ausgewählt

Ulrich König
Inside-Sales-Support (AT)

+49 (0) 2102 / 4989-32

Dr. Claus-Peter Jellen
Internal Sales & Application Manager (AT)

+49 (0) 2102 / 4989-23