- Versions with Atex and IECEx approval
- Unheated probe with shut-off valve and/or inlet filter
- The filter element can easily be removed by turning the handle 90°
- For dust loads up to 2 g/m³, non-condensable gases.
- Combined with inlet filter up to 10 g/m³ and higher
- The probe is suitable for use in explosive areas
In many applications gas analysis is key for safe and efficient control of process flows, environmental protection and quality assurance. In extractive gas analysis the location of the gas sampling point is crucial for the reproducibility and accuracy of the analysis results.
The specific filter capacity, corrosion resistance and functional equipment requirements for the probe arise from the composition of the sample gas.
However, operating costs are also an important criterion in the selection, as the sampling points are frequently located at hard to access points in the system. Effective particle filter backwashing options and low maintenance characterise the extensive GAS probe series.
- Documents
- Spare Parts
- Probe filters, seals, and small parts
46222012 O-ring kit for filter element and probe incl. O-ring lubricant, material: Viton 46222024 O-ring kit for filter element and probe, material: Perfluoroelastomer 46222026 Ceramic filter element incl. Viton O-rings, filter fineness 3 μm 46222026P Ceramic filter element incl. perfluoroelastomer O-rings, filter fineness 3 μm 46222010 Sintered stainless steel filter element incl. Viton O-rings, filter fineness 5μm 46222010P Sintered stainless steel filter element incl. perfluoroelastomer O-rings, filter fineness 5μm 46222011 Sintered stainless steel filter element incl. Viton O-rings, filter fineness 5μm 46222011P Pleated stainless steel mesh filter element incl. perfluoroelastomer O-rings, filter fineness 10μm 46222067 Cover piece for GAS 222.1*/2* with end sleeves to hold the micro-fibreglass filter element, material: 1.4571/Polyamide 462220671 Micro-fibreglass with silicate binder filter element incl. Viton O-rings, filter fineness 0.1μm 462220671P Micro-fibreglass with silicate binder filter element incl. perfluoroelastomer O-rings, filter fineness 0,1μm 46222163 Cover piece for GAS 222.1x/2x, complete with receiving tube, incl. filter floss and Viton O-rings 46222163P Cover piece for GAS 222.1x/2x, complete with receiving tube, incl. filter floss and perfluoroelastomer O-rings 46222167 Filter floss for GAS 222.1x/2x, content 100 g
- Probe filters, seals, and small parts
- Contact Person
- Kevin KöseogluInternal Sales & Application Manager (AT)k.koeseoglu@ buehler-technologies.com
- Dennis GrübmeyerInternal Sales & Application Manager (AT)d.gruebmeyer@ buehler-technologies.com
- Dr. Claus-Peter JellenHead of Internal Sales & Application Management Components for Sample Gas Conditioning (AT)c.jellen@ buehler-technologies.com