Sample Gas Probe GAS 222.17
- Heated 180 °C
- 115/230 V
- Base unit
- With weather hood
- With self-regulating heater
- Low temperature alarm 140 °C
- Insulation
- Including flange seal and screws
Self-regulating heated sample gas probe with integrated particle filter and weather protection. For processes with low dust load. The filter can be replaced without tools.
- DocumentsTo download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
- Accessories for sample gas probes GAS 222To download, simply select the respective documents and click "My Downloads" above.
Data sheets
- Blowback control RSS 24 / RSS 230To download, simply select the respective documents and click "My Downloads" above.
Data sheets
Quick Guide
Detailed operating instructions
- Accessories for sample gas probes GAS 222
- Spare Parts
- General spare parts
462221521 2-piece insulation for
- Probes GAS 222.15/17/20
- Filter AHF-22-462221524 Insulating ring for cap on the 2-piece insulation for
- Probes GAS 222.15/17
- Filter AHF-22-S9009105 Seal for sample gas outlet for - GAS 222 series probes - AHF-22 filter -*** OD=50.5 x ID=6x3mm, material: Silicone up to +200°C 9009079 Flange seal DN65 PN6 for
- Probes GAS 222 OD=77 x ID=115x2mm, material: Pure graphite9136050052 Thermostat 155°C NC contact min. IP40 trigger point 155°C +/-5K reset point 140°C +/-5K max. ambient temperature 200°C 9136050056 Thermostat 155°C NO contact min. IP40 trigger point 155°C +/-5K reset point 140°C +/-5K max. ambient temperature 200°C 462221523 Caps for self-regulating
- Probes GAS 222.14/15/17(Atex2/Amex)
- Filter AHF-22
for 2-piece insulation462221534 Spare parts kit GAS 222.15/17
Cap, complete, incl.
- Insulating ring, spacers
- Heating cartridges with thermostat
- Cable box 3-pin +PE, PG11
- Probe filters, seals, and small parts
462221513 Cover piece with handle for GAS 222.1x/2x, material: 1.4571 / Polyamide 46222012 O-ring kit for filter element and probe incl. O-ring lubricant, material: Viton 46222024 O-ring kit for filter element and probe, material: Perfluoroelastomer 46222026 Ceramic filter element incl. Viton O-rings, filter fineness 3 μm 46222026P Ceramic filter element incl. perfluoroelastomer O-rings, filter fineness 3 μm 46222010 Sintered stainless steel filter element incl. Viton O-rings, filter fineness 5μm 46222010P Sintered stainless steel filter element incl. perfluoroelastomer O-rings, filter fineness 5μm 46222011 Sintered stainless steel filter element incl. Viton O-rings, filter fineness 5μm 46222011P Pleated stainless steel mesh filter element incl. perfluoroelastomer O-rings, filter fineness 10μm 46222067 Cover piece for GAS 222.1*/2* with end sleeves to hold the micro-fibreglass filter element, material: 1.4571/Polyamide 462220671 Micro-fibreglass with silicate binder filter element incl. Viton O-rings, filter fineness 0.1μm 462220671P Micro-fibreglass with silicate binder filter element incl. perfluoroelastomer O-rings, filter fineness 0,1μm 46222163 Cover piece for GAS 222.1x/2x, complete with receiving tube, incl. filter floss and Viton O-rings 46222163P Cover piece for GAS 222.1x/2x, complete with receiving tube, incl. filter floss and perfluoroelastomer O-rings 46222167 Filter floss for GAS 222.1x/2x, content 100 g
- General spare parts
- Certificates & approvalsTo download, simply select the respective documents and click "My Downloads" above.
Certificates & Approvals
- Contact Person
Datenblatt Gasentnahmesonde GAS 222.17, PDF (2 MB) 
Data sheet sample gas probe GAS 222.17, PDF (2 MB) 
Data sheet sample gas probe GAS 222.17, PDF (2 MB) 
Feuille de données sonde de prélèvement de gaz modèle GAS 222.17, PDF (2 MB) 
Hoja de datos sonda de muestreo de gases GAS 222.17, PDF (2 MB) 
参数表 气体取样探头 GAS 222.17, PDF (2 MB) 
Технические паспорта Зонд для отбора газа GAS 222.17, PDF (2 MB) 
Brief Instructions sample gas probe GAS 222.17 (multilingual), PDF (2 MB) 
EU declaration of conformity / EU-Konformitätserklärung KX460012 GAS 222.xx signed, PDF (196 KB) 
